/* Vorwiegend GENERATOR - Layout */

 ŚÄÄÄÄ Blank: String fr UPD und UPL
 ³     d:     String nur fr UPD
 ³     l:     String nur fr UPL
 ³
 ³ŚÄĀÄ max. 3-stelliger Index 000 - 999
 ³³ ³
( 0  ) ""
( 1  )   "@a[5]INSTRUMENT "
( 2  )   "Channel    "
( 3  )   "Output     "
( 4  )   "Sample Frq "
( 5  ) "             "
( 6  ) "             "
( 7  )   "Oversamp   "
( 8  )   "Audio Bits "
( 9  )   "Wordlength "
( 10 )   "Wordoffset "
( 11 )   "WordselCh1 "
( 12 )   "Wordclock  "
( 13 )   "Bitclock   "
( 14 )   "Frq Bitclk "
( 15 )   "Dataformat "
( 16 )   "Bit Order  "
( 17 )   "Validity   "
( 18 )   "Impedance  "
( 19 )   "Common     "
( 20 )   "Max Volt   "
( 21 )   "Ref Freq   "
( 22 )   "Ref Volt   "
( 23 )   "@a[5]FUNCTION Ä "
( 24 )   "Frq Offset "
( 25 )   "Low Dist   "
( 26 )   "Param Link "
( 27 )   "Work File  "
( 28 )   "Dither     "
( 29 )   "Domain     "
( 30 )   "Spacing    "
( 31 )   "Equalizatn "
( 32 )   "Lower Freq "
( 33 )   "Upper Freq "
( 34 )   "PDF        "
( 35 )   "Filename   "
( 36 )   "Mode       "
( 37 )   "No of Sine "
( 38 )   "Square/Sin "
( 39 )   "Bandwidth  "
( 40 )   "SWEEP CTRL "
( 41 )   "X Axis     "
( 42 )   "Z Axis     "
( 43 )   "MEAN FREQ  "
( 44 ) "@a[5]MEAN FREQUENCY"
( 45 )   "MEANF.FILE "
( 46 )   "FREQ FILE  "
( 47 )   "UPP F.FILE "
( 48 )   "FREQUENCY  "
( 49 )   "UPPER FREQ "
( 50 )   "Freq No1   "
( 51 )   "Mod Freq   "
( 52 ) "@a[5]FREQUENCY"
( 53 ) "@a[5]UPPER FREQUENCY"
( 54 )   "Start      "
( 55 )   "Stop       "
( 56 )   "TOTAL GAIN "
( 57 )   "Points     "
( 58 )   "Spacing    "
( 59 )   "Step       "
( 60 )   "DIFF FREQ  "
( 61 )   "LOWER FREQ "
( 62 )   "Freq No2   "
( 63 )   "Carr Freq  "
( 64 )   "Freq No3   "
( 65 )   "Freq No4   "
( 66 )   "Freq No5   "
( 67 )   "Freq No6   "
( 68 )   "Freq No7   "
( 69 )   "Freq No8   "
( 70 )   "Freq No9   "
( 71 )   "Freq No10  "
( 72 )   "Freq No11  "
( 73 )   "Freq No12  "
( 74 )   "Freq No13  "
( 75 )   "Freq No14  "
( 76 )   "Freq No15  "
( 77 )   "Freq No16  "
( 78 )   "Freq No17  "
( 79 )   "Settling   "
( 80 )   "Equalizer  "
( 81 )   "Equal.File "
( 82 )   "VOLTAGE    "
( 83 ) "@a[5]VOLTAGE"
( 84 )   "VOLT PEAK  "
( 85 )   "Volt No1   "
( 86 )   "Mod Factor "
( 87 )   "TOTAL RMS  "
( 88 )   "Volt No2   "
( 89 )   "Carr Volt  "
( 90 )   "Volt No3   "
( 91 )   "Volt No4   "
( 92 )   "Volt No5   "
( 93 )   "Volt No6   "
( 94 )   "Volt No7   "
( 95 )   "Volt No8   "
( 96 )   "Volt No9   "
( 97 )   "Volt No10  "
( 98 )   "Volt No11  "
( 99 )   "Volt No12  "
( 100)   "Volt No13  "
( 101)   "Volt No14  "
( 102)   "Volt No15  "
( 103)   "Volt No16  "
( 104)   "Volt No17  "
( 105)   "TOTAL VOLT "
( 106) "@a[5]TOTAL VOLTAGE"
( 107) "TOTAL VOLT   "
( 108)   "TOT V.FILE "
( 109)   "VOLT FILE  "
( 110)   "Low Level  "
( 111)   "VOLT LF:UF "
( 112)   "DC Offset  "
( 113)   "ON TIME    "
( 114) "@a[5]ON TIME"
( 115)   "ONTIM FILE "
( 116)   "INTERVAL   "
( 117) "@a[5]INTERVAL"
( 118)   "INTV FILE  "
( 119) "LIST MODE    "
( 120)   "Next Step  "
( 121)   "Dwell File "
( 122) "SWEEP MODE   "
( 123)   "Dwell      "

           /* Vorwiegend ANALYZER - Layout */

( 124)   "@a[5]INSTRUMENT "
( 125)   "Min Freq   "
( 126)   "Ref Imped  "
( 127)   "Window     "
( 128)   "Ch1 Input  "
( 129)   "Ch1 Imped  "
( 130)   "Ch1 Common "
( 131)   "Ch1 Range  "
( 132) "             "
( 133)   "Ch2 Input  "
( 134)   "Ch2 Imped  "
( 135)   "Ch2 Common "
( 136)   "Ch2 Range  "
( 137)   "Input      "
( 138)   "Range      "
( 139)   "Orientatn  "
( 140)   "@a[5]START COND "
( 141)   "Delay      "
( 142)   "Time       "
( 143)   "Min Volt   "
( 144)   "Trace Len  "
( 145)   "Min Freq   "
( 146)   "Variation  "
( 147)   "Fnct Settl "
( 148)   "Freq Settl "
( 149)   "B1 Low Dist"
( 150)   "Timeout    "
( 151)   "Avg Count  "
( 152)   "S/N Sequ   "
( 153)   "Meas Mode  "
( 154)   "Standard   "
( 155)   "Weighting  "
( 156)   "Unit Ch1   "
( 157)   "Unit Ch2   "
( 158)   "Unit       "
( 159)   "Meas Time  "
( 160)   "Intv Time  "
( 161)   "@a[5]MONITOR ÄÄ "
( 162)   "Attenuat.  "
( 163)   "Fundamentl "
( 164)   "Graphic    "
( 165)   "Reference  "
( 166)   "FREQ MODE  "
( 167) "  Square/Sin "
( 168)   "Sweep Mode "
( 169)   "List Mode  "
( 170)   "Filter     "
( 171)   "@a[5]POST FFT   "
( 172)   "FFT Size   "
( 173)   "Zooming    "
( 174)   "Zoom Fact  "
( 175)   "Start      "
( 176)   "Stop       "
( 177)   "Center     "
( 178)   "Span       "
( 179)   "Resolution "
( 180)   "Meas Time  "
( 181)   "Window     "
( 182) "   į Factor  "
( 183)   "@a[5]INPUT DISP "
( 184)   "Intv Time  "
( 185)   "TOTAL PEAK "
( 186)   "VOLT RMS   "
( 187)   "@a[5]FREQ/PHASE "
( 188)   "Dig. Vpp   "
( 189)   "Ref Freq   "
( 190)   "Ref Phase  "
( 191)   "Trig Level "
( 192)   "Trig Slope "
( 193)   "@a[5]FREQUENCY  "
( 194)   "Interpol   "
( 195)   "Comment    "
( 196)   "Reference  "
( 197)   "Format Pha "
( 198)   "FrqLim Low "
( 199)   "FrqLim Upp "

           /* Vorwiegend FILTER - Layout */

( 200)   "@a[5]FILTER 01  "
( 201)   "@a[5]FILTER 02  "
( 202)   "@a[5]FILTER 03  "
( 203)   "@a[5]FILTER 04  "
( 204)   "@a[5]FILTER 05  "
( 205)   "@a[5]FILTER 06  "
( 206)   "@a[5]FILTER 07  "
( 207)   "@a[5]FILTER 08  "
( 208)   "@a[5]FILTER 09  "
( 209)   "Passband   "
( 210)   "Passb Low  "
( 211)   "Passb Upp  "
( 212)   "Center Frq "
( 213)   "Width      "
( 214)   "Stopband   "
( 215)   "Stopb Low  "
( 216)   "Stopb Upp  "
( 217)   "FFT Size   "
( 218)   "Phas Settl "
( 219)   "Delay      "
( 220)   "Short Name "
( 221)   "Delay      "
( 222)   "Width      "

           /* Vorwiegend DISPLAY - Layout */

( 223)   "@a[5]OPERATION  "
( 224)   "Mode       "
( 225)   "@a[5]TRACE A ÄÄ "
( 226)   "Scale      "
( 227)   "  Top      "
( 228)   "  Bottom   "
( 229)   "Spacing    "
( 230)   "@a[5]TRACE B ÄÄ "
( 231)   "Scale B    "
( 232) "\n@a[5]X AXIS"
( 233)   "  Left     "
( 234)   "  Right    "
( 235)   "@a[5]COMMENT ÄÄ "
( 236)   "  X Pos    "
( 237)   "  Y Pos    "
( 238)   "@a[5]BARGRAPH A "
( 239)   "@a[5]BARGRAPH B "
( 240)   "@a[5]X AXIS ÄÄÄ "
( 241)   "@a[5]BARGRAPH X "

         /* Vorwiegend OPTION - Layout */

( 242)   "UPD IECadr "
( 243)   "Beeper     "
( 244) "\n@a[5]SCREEN HARD COPY ÄÄÄÄÄÄ"
( 245)   "Copy       "
( 246)   "Abort      "
( 247)   "Plot       "
( 248)   "Printname  "
( 249)   "Plot on    "
( 250)   "IEC Adr    "
( 251) "\n@a[5]PRINT ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ"
( 252)   "Type       "
( 253) "\n@a[5]PANEL KEYS ÄÄÄÄÄÄÄÄÄÄÄÄ"
( 254)   "Reptn Rate "
( 255)   "-dont use- "
( 256) "\n@a[5]DISPLAY ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ"
( 257)   "Extrn Disp "
( 258)   "Rep Delay  "
( 259) "\n@a[5]VERSIONS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ"
( 260) "\n@a[5]SOFTWARE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ"
( 261)   "UI         "
( 262)   "Setup      "
( 263)   "IEC        "
( 264) "\n@a[5]HARDWARE ANALOG ÄÄÄÄÄÄÄ"
( 265)   "Analy Ch1  "
( 266)   "Analy Ch2  "
( 267) "\n@a[5]HELP LANGUAGE ÄÄÄÄÄÄÄÄÄ"
( 268)   "Motherbrd  "
( 269)   "Output Cir "
( 270)   "DAC Board  "
( 271) "\n@a[5]HARDWARE DIGITAL ÄÄÄÄÄÄ"
( 272)   "Analyzer   "
( 273)   "Language   "
( 274) "\n@a[5]OPTIONS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ"
( 275)   "Low Dist   "
( 276)   "IEC Board  "
( 277)   "AES/EBU    "
( 278)   "Destin     "
( 279)   "Highsp Anl "
( 280)   "Highsp Dig "
( 281)   "Noname GEN "
( 282)   "Jitter Opt "
( 283)   "Generator  "
( 284)   "Notch(Gain)"
( 285)   "Notch Freq "
( 286)   "Tolerance  "
( 287)   "Resolution "
( 288)   "Samples    "
( 289)   "Disp Confg "

         /* Vorwiegend FILE/LIMIT - Layout */

( 290)   "@a[5]LOAD INSTRUMENT STATE Ä"
( 291) "\n@a[5]STORE INSTRUMENT STATE"
( 292)   "Attrib     "
( 293) "\n@a[5]STORE TRACE/LIST ÄÄÄÄÄÄ"
( 294)   "Store      "
( 295) "\n@a[5]PARAM. LINK ÄÄÄÄÄÄÄÄÄÄÄ"
( 296)   "Volt Sourc "
( 297)   "Invert 1/n "
( 298) "\n@a[5]STORE SCREEN COPY ÄÄÄÄÄ"
( 299) "\n@a[5]LIMIT CHECK ÄÄÄÄÄÄÄÄÄÄÄ"
( 300)   "Check      "
( 301)   "Lim Upper  "
( 302)   "Lim Lower  "
( 303) "\n@a[5]UTILS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ"
( 304)   "Delete     "
( 305)   "Work Dir   "
( 306)   "Copy       "
( 307)   "To         "
( 308)   "Format     "
( 309)   "Norm Freq  "
( 310)   "System     "
( 311)   "@a[5]SERVICE    "
( 312)   "Diag State "
( 313)   "DAC VoltAC "
( 314)   "DAC VoltDC "
( 315)   "AGEN Board "
( 316)   "Position   "
( 317)   "Count(Bit) "
( 318)   "Bitvalue   "
( 319)   "Enable Bit "
( 320)   "Execute    "
( 321)   "ANLR Board "
( 322)   "Zero Auto  "
( 323)   "Proto File "
( 324)   "Source     "

         /* Vorwiegend Protokoll-Layout */

( 325) "\n@a[5]AES PROTOCOL ÄÄÄÄÄÄÄÄÄÄ"
( 326)   " No. Trues "
( 327)   " No. False "
( 328)   " Offset    "
( 329)   "Block Err  "
( 330)   "Sequ. Err  "
( 331)   "Ch Stat. L "
( 332)   "Ch Stat. R "
( 333)   "CRC Error  "
( 334)   "User Mode  "
( 335)   "Panelname  "
( 336)   "Parity     "
( 337) "\n@a[5]BASIC/LOGGING ÄÄÄÄÄÄÄÄÄ"
( 338)   "Appendmode "
( 339) "\n@a[5]CALIBRATION ANL ÄÄÄÄÄÄÄ"

         /* Layout der freidefinierbaren EAN-Befehle */

( 340)   "EAN-Idnt00 "
( 341)   "EAN-Idnt01 "
( 342)   "EAN-Idnt02 "
( 343)   "EAN-Idnt03 "
( 344)   "EAN-Idnt04 "
( 345)   "EAN-Idnt05 "
( 346)   "EAN-Idnt06 "
( 347)   "EAN-Idnt07 "
( 348)   "EAN-Idnt08 "
( 349)   "EAN-Idnt09 "
( 350)   "EAN-Idnt10 "
( 351)   "EAN-Idnt11 "

         /* Layout der freidefinierbaren INT-Befehle */

( 352)   "INT-Idnt00 "
( 353)   "INT-Idnt01 "
( 354)   "INT-Idnt02 "
( 355)   "INT-Idnt03 "
( 356)   "INT-Idnt04 "
( 357)   "INT-Idnt05 "
( 358)   "INT-Idnt06 "
( 359)   "INT-Idnt07 "
( 360)   "INT-Idnt08 "
( 361)   "INT-Idnt09 "
( 362)   "INT-Idnt10 "
( 363)   "INT-Idnt11 "

         /* Layout der freidefinierbaren STR-Befehle */

( 364)   "STR-Idnt00 "
( 365)   "STR-Idnt01 "
( 366)   "STR-Idnt02 "
( 367)   "STR-Idnt03 "
( 368)   "STR-Idnt04 "
( 369)   "STR-Idnt05 "

         /* Layout der freidefinierbaren Erweiterten EAN-Befehle */

( 370)   "XEAN-Idnt0 "
( 371)   "XEAN-Idnt1 "
( 372)   "XEAN-Idnt2 "
( 373)   "XEAN-Idnt3 "

         /* Erweiterungen */

( 374) "\n@a[5]CALIBRATION GEN ÄÄÄÄÄÄÄ"
( 375)   "Ch2 Auto   "
( 376)   "Dyn Mode   "
( 377)   "Setting    "
( 378)   "Avg Mode   "
( 379)   "Color      "
( 380)   "Left Mrgn  "
( 381)   "@a[5]SPEAKER ÄÄ "
( 382)   "Pre Gain   "
( 383) "\n@a[5]SWITCHER ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ"
( 384)   "Switcher   "
( 385)   "Tracking   "
( 386)   "B vs A     "
( 387)   "Out vs Inp "
( 388)   "Input  A   "
( 389)   "Input  B   "
( 390)   "Input  B   "
( 391)   "Output A   "
( 392)   "Output A   "
( 393)   "Output B   "
( 394)   "Output B   "
( 395)   "Spk Volume "
( 396)   "Dest Addr  "
( 397)   "Show       "
( 398)   "Phone Out  "
( 399)   "SPK/SWI    "
( 400)   "Meas Disp  "
( 401)   "User Label "
( 402)   "Unit/Label "
( 403)   "Mode       "
( 404)   "Scan Count "
( 405)   "X Scaling  "
( 406)   "Y Scaling  "
( 407)   "Address    "
( 408)   "Data       "
( 409)   "BurstOnDel "
( 410) "   Comp Fact "
( 411)   "Read Rate  "
( 412)   "Read Resol "
( 413)   "Prn Resol  "
( 414)   "Prn Width  "
( 415)   "Prn Height "
( 416)   "Rejection  "
( 417) "\n@a[5]SPK DC VOLTAGE ÄÄÄÄÄÄÄÄ"
( 418)   "DC Volt    "
( 419)   "Frame Col  "
( 420)   "UPL IECadr "
( 421)   "Anlg Board "
( 422)   "Main Gen   "
( 423)   "@a[5]DIAGNOSTIC "
( 424)   "Board      "
( 425)   "Anlr selCh "
( 426)   "Execute    "
( 427)   "Device     "
( 428)   "Src Mode   "
( 429)   "Unbal Out  "
( 430)   "Cable Sim  "
( 431)   "Sync To    "
( 432)   "Sync Mode  "
( 433)   "PhaseToRef "
( 434)   "Sync Out   "
( 435)   "  Type     "
( 436)   "Ref Out    "
( 437)   "  Data     "
( 438)   "Bal Vpp    "
( 439)   "Crest Fact "
( 440)   "Phas No1   "
( 441)   "Phas No2   "
( 442)   "Phas No3   "
( 443)   "Phas No4   "
( 444)   "Phas No5   "
( 445)   "Phas No6   "
( 446)   "Phas No7   "
( 447)   "Phas No8   "
( 448)   "Phas No9   "
( 449)   "Phas No10  "
( 450)   "Phas No11  " 
( 451)   "Phas No12  " 
( 452)   "Phas No13  " 
( 453)   "Phas No14  " 
( 454)   "Phas No15  " 
( 455)   "Phas No16  " 
( 456)   "Phas No17  "
( 457)   "Meas Mode  "
( 458)   "Jitter Ref " 
( 459)   "Anlr Sync  " 
( 460)   "Sync Mode  " 
( 461)   "Trig Src   "
( 462)   "Normalize  "
( 463)   "Remote via "
( 464)   "Unbal Vpp  "
( 465)   "Value      "
( 466)   "B5 Speaker "
( 467)   "Dig  Board "
( 468)   "B2 DigAudio"
( 469)   "Option No. "
( 470)   "InstallKey "
( 471)   "Jitt Freq  "
( 472)   "@a[5]Jitter Freq"
( 473)   "@a[5]JitterPkAmpl"
( 474)   "JittPkAmpl "
( 475)   "Comm Freq  "
( 476)   "@a[5]Common Freq"
( 477)   "@a[5]Common Ampl"
( 478)   "Comm Ampl  "
( 479)   "@a[5]INPUT/PHAS "
( 480)   "Software   "
( 481)   "CPU  Board "
( 482)   "B4 Rem Ctrl"
( 483)   "B21 DA Prot"
( 484)   "B22 DA Jitt"
( 485)   "B10 SeqCtrl"
( 486)   "Limit Ref  "
( 487)   "B6  Coher  "
( 488)   "Unit Ch1   "
( 489)   "Jitt Mode  "
( 490)   "\n@a[5]CALIBRATION DIG ÄÄÄÄÄÄÄ"
( 491)   "PhaseToRef "
( 492)   "Multisine  "
( 493)   "AESEBU Vpp "
( 494)   "Sample Frq "
( 495)   "Shape      "
( 496)   "@a[5]PROTOCOL   "
( 497)   "Shape File "
( 498)   "S/PDIF Out "
( 499)   "S/PDIF Vpp "
( 500)   "AESEBU Vpp "
( 501)   "\n@a[5]COM2 PARAMETER ÄÄÄÄÄÄÄÄ"
( 502)   "Baud Rate  "
( 503)   "Parity     "
( 504)   "Data Bits  "
( 505)   "Stop Bits  "
( 506)   "Handshake  "
( 507)   "@a[5]AUX GEN    "
( 508) "@a[5]JITTER FREQUENCY"
( 509)   "JITTPKAMPL "
( 510)   "JITT FREQ  "
( 511) "@a[5]JITTER PEAK AMPL"
( 512) "@a[5]COMMON FREQUENCY"
( 513)   "COMM AMPL  "
( 514)   "COMM FREQ  "
( 515) "@a[5]COMMON MODE AMPL"
( 516)   "Anlg Freq  "
( 517)   "Anlg Ampl  "
( 518) "@a[5]ANALOG FREQUENCY"
( 519)   "ANLG VOLT  "
( 520)   "ANLG FREQ  "
( 521) "@a[5]ANALOG VOLTAGE"
( 522)   "Info Displ "
( 523)   "Info Text  "
( 524)   "Volt Range "
( 525)   "           "
( 526)   "DC Volt    "
( 527)   "     code  "
( 528)   "Data Freq  "
( 529)   "Data Ampl  "
( 530)   "  Factor   "
( 531)   "Sweep Mode "
( 532)   "Paper Size "
( 533)   "Plots/Page "
( 534)   "Order      "
( 535)   "\n@a[5]TRACES COLOR/LINE ÄÄÄÄÄ"
( 536)   "Scan conf  "
( 537)   "Scannr.(A) "
( 538)   "Color  (A) "
( 539)   "Line   (A) "
( 540)   "Scannr.(B) "
( 541)   "Color  (B) "
( 542)   "Line   (B) "
( 543)   "Ch1 Coupl  "
( 544)   "Ch2 Coupl  "
( 545)   "Coupling   "
( 546)   "DC Suppres "
( 547)   "B33 ITU O33"
( 548)   "\n@a[5]DIGITAL I/O CONFIG ÄÄÄÄ"
( 549)   "Standard   "
( 550)   "Test Ctrl  "
( 551)   "Reset      "
( 552)   "Interface  "
( 553)   "DAI Source "
( 554)   "Max Hold   "
( 555)   "U8 GSM DAI "
( 556)   "Exec Macro "
( 557)   "Mobile     "
( 558)   "Clock      "
( 559)   "B8 PhoneTst"
( 560)   "Loop Gain  "
( 561)   "Loop Chan  "
( 562)   "RND PEAK   "
( 563)   "RND RMS    "
( 564)   "Coding     "
( 565)   "Chan Delay "
( 566)   "Holdtime   "
( 567)   "@a[5]COM-FUNCT: "
( 568)   "@a[5]JIT-FUNCT: "
( 569)   "Value      "
( 570)   "\n@a[5]DIGITAL AUDIO I/O ÄÄÄÄÄ"
( 571)   "Sampl Mode "
( 572)   "B29 Dig96  "
( 573)   "Mod Depth  "
( 574)   "Deviation  "
( 575)   "Applicat   "
( 576)   "Measuring  "
( 577)   "Freq Mode  "
( 578)   "Volt Mode  "
( 579)   "Freq Ch1   "
( 580)   "Freq Ch2   "
( 581)   "Volt Ch1   "
( 582)   "Volt Ch2   "
( 583)   "Volt Ch2:1 "
( 584)   "Phas Ch2:1 "
( 585)   "VOLT CH1   "
( 586)   "@a[5]VOLTAGE CH1"
( 587)   "Ampl Var   "
( 588)   "Mod Freq   "
( 589)   "Variation  "
( 590)   "Format     "
( 591)   "Chan Mode  "
( 592)   "Frequency  "
( 593)   "Vari Mode  "
( 594)   "FREQUENCY  "
( 595)   "TOTAL VOLT "
( 596)   "Line Count "
( 597)   "B23 Coded  "
( 598)   "B9 3G Tests"
( 599)   "Equalizer  "
( 600)   "Equal.File "
( 601)   "FilterFile "